When it comes to home decor, vintage is definitely in. But if you have ever done some DIY woodworking projects, you’ll know it can be hard to obtain that aged wood look. You can either buy pricey “barn wood” from a boutique lumber supplier or let your new lumber from Home Depot sit in the backyard, exposed to the elements for a couple of midwest winters – or perhaps you may want to use this easy, inexpensive method for aging your wood in just under a week.

What You’ll Need

For this project you’ll need a few household items from your pantry and garage:

Step 1: Make Your Oxidation Solution

Creating your oxidation solution is straightforward. Take a roll of steel wool and tear off bits into your glass jar. Pour in the vinegar until your jar is full and cap the jar with the lid. Oxidation of the steel wool will take about 4-5 days in my experience. In general, the longer your solution can oxidize, the darker your wood color will be. I tested my solution on some pale pine wood after 3 days and it had a nice dark yellow hue to it. After about 6 days of sitting, the solution produced a dark gray. Because every wood will react differently,  I would recommend testing your solution on scrap wood to see what kind of hue you’ll get.


Step 2: Give Your Wood Some Tannins

To help give your wood more definition and properly prep it, you’ll want to brush it with some strong black tea. I brewed some rather strong tea with 10 bags in 2 cups of boiling water. As you can imagine, the tea will slightly stain your wood, but it will also give  your wood grain more of a pop. I also discovered that the black tea gives the wood a nicer finisher when you finally apply your oxidation solution. If you skip the tea step, and just use oxidation solution, the wood will end up looking dirty and not aged. There’s just something about that tea that gives the wood a more refined look – sort of how British accents make things seems more sophisticated.

Screen Shot 2016-04-07 at 10.27.33 PM

Step 3: Oxidize Your Wood

When your wood is dry from high tea, and after the oxidation solution has sat for 4-5 days, your wood will be ready to get “the look”. When you crack open (not literally) your jar, there will probably still be steel wool floating in the solution – that’s ok. If you leave the solution sitting long enough, eventually all steel wool remnants will dissolve. And you can save the solution for future projects. Using a foam brush, paint on the solution. The wood will almost instantly turn gray, and over the next 10 minutes, it will get even darker.

Screen Shot 2016-04-07 at 10.57.50 PM

Step 4: Sand & Finish

After the wood has dried, give it a light sanding with 400-grit sandpaper. This will help lighten up the stain and even out the color. The more you sand the wood, the more you’ll remove the stain (obviously), but it can produce some unique variations in the grain – up to you, but again, be sure to experiment on some scrap wood before applying to your final project.

For the finish, I use a clear semi-gloss Poly Whey Furniture Finish from Vermont Natural Coatings. This is a really easy-to-use finish with low odor, quick dry time, and it feels great to the touch. I can’t recommend it highly enough, and you have it shipped right to you from Amazon. I like to lightly sand with 400-grit sandpaper after each coat to keep that super smooth feel, and I would recommend applying 3 coats of this finish. Be aware that the finish will change the color of the wood slightly to give it a warmer, almost tarnished hue.

Below is a side-by-side of how far we’ve come with the unfinished pinewood (left) to wood with the tea-stain and oxidation solution (middle) to the wood with 3 coats of finish.



So what will you build now that you know how easy it is to get this vintage wood look? I’ve got a few projects up my sleeve, and when you think about it, the sky’s the limit. Imagine building your own farm table or a little box for holding those bathroom towels that you’re not suppose to use – whatever! Below is a wall-mount bottle open I made. My goal was to make it look like the plank of wood came from an old crate from the brewery.


Let me know if you have any ideas in the comments below, and I would love to see what you build.

And a special thank to Hillary at Friendly Home for all the inspiration for his post.


  1. Any idea how this would work on Burma Teak? I’m about to try on a sample anyways. Also, if you’ve tried this on any veneered plywood. Thank you.


  2. Thank you for the great video. …❤️ your little helper!!!
    I tried the vinegar solution (no tea) and my chairs are dark…
    please let me know how to make them a lighter colour ( grey with golden wood tones)
    It takes for ever to sand them and still a very light grey colour remains.
    Any easy technique besides sanding? Thank you…😊


  3. Thanks for the awesome advice! We’ve just had pine decking and sleeper seats installed in our pool area. I wanted pine (or cypress, but no luck) so it could fade to grey. Being the impatient soul that I am, I decided to find out if I could speed up the process. Am definitely going to give your method a try. I have one question: the pine I have is H3 treated, so it has a slight green tinge (which I know will fade), but will your method work, do you know. I have offcuts, so I’ll give it a whirl, but thought maybe you had some experience with treated pine.


  4. Hello, I’m going to attempt this on my new $2500 front door. I’m going to try it on a bit of the matching molding of the same wood type first. I was wondering if you could shoot me your email address so I can send you a picture of the door and get any quick bits of advice you may have. Much appreciated!


  5. Jeremy
    I was wondering what kind of tea did you use? I’m building and enterainment center for my daughter and she wants the deck where the TV sets to have that old weathered look. The deck is red oak.
    Is there a way to control how dark of a gray it takes on?


    1. Hi David. I used black tea, and you try to control how dark the wood gets by adding different amounts of steel wool. The more steel wool in the solution, the darker the stain. You can also sand the wood after the stain to lighten the color. Good luck and shoot me a picture of the project when it’s finished.


  6. Hello ! what a fantastic video !! I came here from youtube and also asked you a question there as well 🙂 Is this a permanent stain ? or will it lighten with time ? I am thinking of applying this method to my lathe turned pens. do you think It would be fine ? Thanks !


  7. Jeremy ~
    Love the info here. My husband and I are remodeling 2 upstairs bedrooms. We plan to have a pine wood ceiling and 2 pine wood accent walls. We’ll be using your method to stain.
    I plan to do some with tea (gray tone), some with coffee (brown tone) and some with only the vinegar solution (light gray). I’m hoping for a variety of tones to then alternate the boards for a slightly uneven, weather wood look.
    Any other suggestions for varying the tones?
    I appreciate your straight forward video, written directions then the follow up here.
    Thank you.


  8. I would like to try this on 3/8 inch plywood. The idea is to create a ship lap wall with browns and grays. Your using solid wood boards. Can you get the same effect with one side good plywood?? And thanks again for your video. Very cool.


    1. If you’re using good quality plywood, you shouldn’t have to sand them before applying the stain. Since plywood can react differently than milled boards, try testing the stain first. Good luck and shoot me a photo of the project when it’s done.


  9. Thanks for the excellent video titled: Oxidize! Getting A Vintage Wood Look. Your video and detailed instructions has inspired me to attempt this process on white pine boards I’m using for bookshelves. I’ll let know how it turns out.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s